Product Details

ALL IN ONE KIT(WITH UL CERTIFICATION):

This is a standard kit. The adaptor With UL certification and only can load 32.8ft. Please don’t increase the strip light. Comes with continuous 10 Meter*2rolls, Remote, IR receiver and AC adaptor.No more accessories are required.

Safe and touchable to your children:

It’s can change the color via the remote.20 preset colors + DIY colors.Very suitable for indoor lighting and decor. Such as kitchen, under cabinet, bedroom, party.

WITH HIGH TEMPERATURE ADHESIVE:

It’s blue high-temperature adhesive tape backing, improving the issue that the tape getting weak during operation. It is specifically designed for good adhesion to high, medium and lower surface energy plastics, paints and glass.

EASY TO INSTALL & CUTTABLE:

Simply connected all the parts together and peel off the protection layer, then stick to the clean dry and flat surface. This multi-color changing LED Strip Lights can be cut to every 3 LEDs along with the cutting marks, without damaging the rest strips.

Features:

Continuous length, packed with 5 meter. Long life span 50,000+ hours and Low power consumption. Run on DC12V. Safe and reliable.
Flexible ribbon for curving around bends. Ultra-bright but running at low temperature.
Connectable, use a L shape or extension connector if you need to slice the strip.
With brightness control, mode selection and color selection. Even with a DIY function which you can customize your own color.

Led Strip:

Number/M: 30 pcs/m; total 150leds
Length: 5m(16.4ft)/reel
Wide: 10mm
Is waterproof: Yes
Voltage: 12V
Color: RGB

Power supply

Input: 100-240VAC, 50/60Hz
Output: 12V
Max Current: 2A
Power consumption: 24W
DC port: 5.5 x 2.1mm (outer diameter x inner diameter)

Tips

Don’t left them on the spool when you testing them more than 2-3 mins. They need to dissipating heat.
Clean the surface before stick on the strip. If it is not sticky enough, you can add some double sided tape.
The ventilation must be ensured. These lights need an excessive amount of airflow for cooling.
Please don’t stick the lights to metal surface that conductive. It may cause a short-circuit on the strip light.

24K IR Remote:

Input voltage: 12V DC
Max output current:2A/ each channel
Control mode: IR
Dimming mode: PWM
Output: 12V DC, 3 * 2 A
Control distance: 5M (must be pointing at the sensor without any obstacles)
DIY function: Click DIY 1. and then long press the up or down key(arrows) until the desired color appear.

Application